Scania P500 P520 slip assembly for driveshafts using the 57.1×164 mm universal-joint family, also commonly listed as 57×164 mm. Spline dimensions, working length and tube connection must be confirmed from the drawing or sample.
Scania P500 P520 weld yoke for driveshafts using the 57.1×164 mm universal-joint family, also commonly listed as 57×164 mm. Tube diameter, wall thickness and fork dimensions must be confirmed before production.
The 687.35 flange yoke is a Ø150 mm end-face serrated driveshaft flange yoke for a 42x119.4 mm universal joint. It features a Ø130 mm pitch circle and 8xØ12 mm mounting holes for drawing-matched production.
The 687.35 tube yoke is a weld yoke for a 42x119.4 mm universal joint. Bearing seats, fork geometry and the tube connection are manufactured from the approved drawing for driveshaft production and replacement projects.
The 687.35 slip assembly is a driveshaft sliding-spline unit for a 42x119.4 mm universal joint. It is supplied as a matched fork-and-sleeve assembly for drawing-based heavy-duty driveline production.
687.55 slip assembly for 2055-series heavy-duty propeller shafts using a nominal 57x152 mm universal joint and 120 mm sleeve section. Greaseable protected-spline construction; confirm spline geometry, working length and slip travel before ordering.
687.55 weld yoke for 2055-series 57x152 mm universal joints and 120x6 mm driveshaft tube. Forged steel construction with machined bearing bores and nominal 108 mm weld-fit bore.
687.55 flange yoke with a 180 mm cross-serrated face for 2055-series 57x152 mm universal joints. Four-bolt arrangement, 150 mm PCD and 100 mm nominal flange-face-to-bearing-centreline dimension.
5-7126 universal joint for Mechanics 7C heavy-duty drivelines. Nominal identification dimensions are 49.2 mm wing bolt-hole centre distance and 148.4 mm lock-up span. Four HWD wing bearings, greaseable cross, mounting bolts and split lock washers are shown. Cross references include G5-7126X, 5-7105X, Precision 927, CP72N-31, HS575, U7105 and Caterpillar 6H2577.
G5-6128X universal joint with a 42.8 mm bearing-cap diameter and 140.4 mm overall span. Four-wing heavy-duty 4HWD construction with greaseable cross, mounting bolts and spring washers. Cross references include 5-6128X, 1S9670, 145-14-00190, CP62N-HWD, 114-6285 and 3-66059. Intended for dimension- and reference-matched construction machinery driveshaft service.
5-124X universal joint for 1800 Series driveline service, with approximately 58.9 mm bearing cups and 167.5 mm overall span (market size 59×168 mm). Cross references include G5-124X, UJ335, 335, HS324, 1804, U-107, CP124XE, 6-0124 and 230-0124. Greaseable kit with four bearing cups, four retaining rings and a grease fitting; verify dimensions and yoke retention before ordering.
GUIS-52 universal joint for ISUZU driveline service, with 29 mm bearing cups, 50 mm inside-circlip lock-up and approximately 76–77 mm overall span. Confirmed catalog references include 9-37300-065, 2-0383, 12976 and UJ314/UJ324. The photographed greaseable kit includes four special internal retaining rings.
WG9725310020 universal joint in the 62×160 mm heavy-duty size for HOWO, FAW and SHACMAN driveline service. Confirmed search references include GU-62160, 2205030B377 and SH24-00606. The photographed greaseable kit shows one cross with four installed bearing cups, four retaining rings and one separate open cup displaying the needle rollers.
3088 universal joint with 30 mm bearing cups, 55 mm inside-circlip lock-up and 88 mm overall span. The BJ212 drawing specifies four 33x1.5 mm internal retaining rings, a greaseable cross and XHP322 axle grease. This is an inside-circlip design: verify the cup diameter, distance between the inner retaining faces and full cup-to-cup span before ordering.
5-280X universal joint for Spicer 1710 Series full bearing-plate driveline applications. Official dimensions are 49.225 mm bearing cup diameter and 154.788 mm overall span. This greaseable BP-style kit uses bearing plates on all four cups and includes the mounting hardware shown. Search references include M280X, CP280X, US280X, Neapco 5-0280, 5-0280GXL, 5-0280Q, Precision 334, GMB G5280X and GU5000. Confirm plate-hole spacing, yoke style and dimensions before ordering.
5-675X universal joint for Spicer 1710 Series half-round driveline applications. Dana specifies 49.225 mm bearing cups, 154.788 mm length, bearing-plate x round cap construction and side-of-cross lubrication. The photographed greaseable kit includes the cross, four bearing cups, retaining straps or plates and mounting bolts. Search references include M675X, 6-0675, 6-0675GXL, 25-675X, 7525675X and CP675X. Confirm yoke style, span and bolt-hole spacing before ordering.
