3102-2201025 universal joint with 30 mm bearing cups, 55 mm inside-circlip lock-up and 88 mm overall span. Cross references include UJ3110, 3088, 31029-2201026, 69-2201025, 469-2201025 and BJ212. Suitable for dimension-matched GAZ, UAZ, Volga and Gazelle propeller-shaft service; verify all three measurements and the internal retaining-ring style before ordering.
Dana Spicer 5-263X is a 1480 Series greaseable heavy-duty universal joint with a bearing cap diameter of 1.375" (34.9mm) and an overall width of 4.188" (106.4mm). Fits a wide range of heavy trucks and commercial vehicles. Direct replacement for 5-188X, 15-188X, and numerous OEM cross references including Volvo, Navistar, Komatsu, and International Harvester applications.
3598 universal joint in 35×98 mm size for driveshaft, propshaft and selected agricultural driveline service. This greaseable external-circlip kit includes one cross assembly, four installed bearing cups, four snap rings and an angled grease fitting. Important search references include UJ3598, UJ3598Q, UJ3598INA, NJ131, GU1000 and GUM71.
High-torque 95x160mm GWB 392.60 / SWP285 inside circlip universal joint for industrial driveshafts. Exact OEM replacement with cap & bolt design. Wholesale available.
39x116 universal joint marked 3916 for greaseable propeller-shaft service. Catalog references for the same dimensional family include GU3500, Spicer 5-15X and 5-115X, Precision 370 and GKN HS176. The photographed kit includes one assembled cross, four bearing cups, four external circlips and cup-end grease fittings. Confirm the measured cup diameter, overall span and circlip arrangement before ordering.
5-124X universal joint for 1800 Series driveline service, with approximately 58.9 mm bearing cups and 167.5 mm overall span (market size 59×168 mm). Cross references include G5-124X, UJ335, 335, HS324, 1804, U-107, CP124XE, 6-0124 and 230-0124. Greaseable kit with four bearing cups, four retaining rings and a grease fitting; verify dimensions and yoke retention before ordering.
5-153X universal joint for 1310 series driveshaft applications. Greaseable design with outside snap ring, 1.062" bearing cap diameter and 3.219" overall width (26.975 x 81.8 mm). Cross reference: Spicer 5-153X, Neapco 1-0153, SKF UJ369.
Part Number: 5-160X
Product Type: Universal Joint / U-Joint / Cross Kit
Series: Dana Spicer 1410 Series
Design: Outside Snap Ring (OSR)
Lubrication: Greaseable
Bearing Cap Diameter: 1.188 in / 30.175–30.188 mm
Overall Width / Lock-Up: 4.188 in / 106.35–106.4 mm
Snap Ring Type: External
Application: Driveshaft / Prop Shaft / Cardan Shaft
5-280X universal joint for Spicer 1710 Series full bearing-plate driveline applications. Official dimensions are 49.225 mm bearing cup diameter and 154.788 mm overall span. This greaseable BP-style kit uses bearing plates on all four cups and includes the mounting hardware shown. Search references include M280X, CP280X, US280X, Neapco 5-0280, 5-0280GXL, 5-0280Q, Precision 334, GMB G5280X and GU5000. Confirm plate-hole spacing, yoke style and dimensions before ordering.
5-281X universal joint for 1810 Series full-round bearing-plate drivelines. The greasable joint measures 49.225 mm (1.938 in) at the bearing caps and 191.694 mm (7.547 in) across the bearing-plate dimension. Verified comparison references include Neapco 6-0281, Meritor CP18N and Rockwell/Meritor R-281X. Confirm the dimensions and bearing-plate retention style before ordering.
5-675X universal joint for Spicer 1710 Series half-round driveline applications. Dana specifies 49.225 mm bearing cups, 154.788 mm length, bearing-plate x round cap construction and side-of-cross lubrication. The photographed greaseable kit includes the cross, four bearing cups, retaining straps or plates and mounting bolts. Search references include M675X, 6-0675, 6-0675GXL, 25-675X, 7525675X and CP675X. Confirm yoke style, span and bolt-hole spacing before ordering.
5-7126 universal joint for Mechanics 7C heavy-duty drivelines. Nominal identification dimensions are 49.2 mm wing bolt-hole centre distance and 148.4 mm lock-up span. Four HWD wing bearings, greaseable cross, mounting bolts and split lock washers are shown. Cross references include G5-7126X, 5-7105X, Precision 927, CP72N-31, HS575, U7105 and Caterpillar 6H2577.
50135 universal joint in the nominal 50x135 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. Search references include 5320-2205025, 5320-2205025-01, 131-2205025, 53205-2201025 and 6520-2201025. The photographed greaseable kit contains one cross with four installed bearing cups, four external circlips, one angled grease fitting and the shown protective accessory. Confirm all dimensions and retention details before ordering.
50155 universal joint in the 50x155 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. The photographed greaseable kit includes one cross with four installed bearing cups, four external circlips, one angled grease fitting and the supplied protective accessory. Search references include 4310-2205025, 255B-2201025, UJ255B, 804707A1C10 and 804707K8C10; confirm the retention style and yoke measurements before ordering.
53×135 mm serviceable universal joint for selected Mercedes-Benz truck and bus propeller shafts. Features a central grease fitting and external circlip retention. Cross references include U993, GU7610, CEI 133.090, 286.37 and Mercedes-Benz OE 6204100131.
- Dimensions: Bearing cap Ø 52 mm × Span 133 mm
- Fixing type: External circlips (OSR, circlips usually included in kits)
- Lubrication options: Greaseable (central greaser / grease nipple) or service-free / maintenance-free (lube-for-life, no grease fitting)
- Applications: Heavy-duty truck drivelines, propeller shafts in medium to heavy commercial vehicles
- Material: High-strength forged alloy steel (often 20Cr or 20CrMnTi) with precision-ground needle bearings for high torque, vibration resistance, and longevity
- Common series reference: 587.30 / 58730 (GWB / Dana style), or equivalent European heavy-duty metric series, GU7560 HS282
