3088 universal joint with 30 mm bearing cups, 55 mm inside-circlip lock-up and 88 mm overall span. The BJ212 drawing specifies four 33x1.5 mm internal retaining rings, a greaseable cross and XHP322 axle grease. This is an inside-circlip design: verify the cup diameter, distance between the inner retaining faces and full cup-to-cup span before ordering.
3598 universal joint in 35×98 mm size for driveshaft, propshaft and selected agricultural driveline service. This greaseable external-circlip kit includes one cross assembly, four installed bearing cups, four snap rings and an angled grease fitting. Important search references include UJ3598, UJ3598Q, UJ3598INA, NJ131, GU1000 and GUM71.
39x116 universal joint marked 3916 for greaseable propeller-shaft service. Catalog references for the same dimensional family include GU3500, Spicer 5-15X and 5-115X, Precision 370 and GKN HS176. The photographed kit includes one assembled cross, four bearing cups, four external circlips and cup-end grease fittings. Confirm the measured cup diameter, overall span and circlip arrangement before ordering.
5-124X universal joint for 1800 Series driveline service, with approximately 58.9 mm bearing cups and 167.5 mm overall span (market size 59×168 mm). Cross references include G5-124X, UJ335, 335, HS324, 1804, U-107, CP124XE, 6-0124 and 230-0124. Greaseable kit with four bearing cups, four retaining rings and a grease fitting; verify dimensions and yoke retention before ordering.
5-280X universal joint for Spicer 1710 Series full bearing-plate driveline applications. Official dimensions are 49.225 mm bearing cup diameter and 154.788 mm overall span. This greaseable BP-style kit uses bearing plates on all four cups and includes the mounting hardware shown. Search references include M280X, CP280X, US280X, Neapco 5-0280, 5-0280GXL, 5-0280Q, Precision 334, GMB G5280X and GU5000. Confirm plate-hole spacing, yoke style and dimensions before ordering.
5-675X universal joint for Spicer 1710 Series half-round driveline applications. Dana specifies 49.225 mm bearing cups, 154.788 mm length, bearing-plate x round cap construction and side-of-cross lubrication. The photographed greaseable kit includes the cross, four bearing cups, retaining straps or plates and mounting bolts. Search references include M675X, 6-0675, 6-0675GXL, 25-675X, 7525675X and CP675X. Confirm yoke style, span and bolt-hole spacing before ordering.
50135 universal joint in the nominal 50x135 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. Search references include 5320-2205025, 5320-2205025-01, 131-2205025, 53205-2201025 and 6520-2201025. The photographed greaseable kit contains one cross with four installed bearing cups, four external circlips, one angled grease fitting and the shown protective accessory. Confirm all dimensions and retention details before ordering.
50155 universal joint in the 50x155 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. The photographed greaseable kit includes one cross with four installed bearing cups, four external circlips, one angled grease fitting and the supplied protective accessory. Search references include 4310-2205025, 255B-2201025, UJ255B, 804707A1C10 and 804707K8C10; confirm the retention style and yoke measurements before ordering.
70166 universal joint in 70×166 mm size for FAW J5/J6 heavy-truck driveline service. Important search references include 2205030B761, 2205030B761/B, UW70166. The photographed set includes one cross assembly with four installed bearing cups and one separate grease fitting; no loose retaining rings are shown.
72176 universal joint in 72×176 mm size for selected FAW heavy-truck driveline service. This greaseable external-circlip kit includes one cross assembly, four installed bearing cups, four loose snap rings and one separate grease fitting. Confirm both dimensions and the original application before ordering because no verified OE interchange number is assigned to this listing.
CA-141 universal joint in the customer-specified 39x118 mm size for selected truck and propeller-shaft applications. The greaseable kit shown includes one cross with four installed bearing cups, four external snap rings and one side grease fitting. EQ140 is included as a useful cross-search term, but cup diameter and overall span must be measured before interchange is confirmed.
G5-6128X universal joint with a 42.8 mm bearing-cap diameter and 140.4 mm overall span. Four-wing heavy-duty 4HWD construction with greaseable cross, mounting bolts and spring washers. Cross references include 5-6128X, 1S9670, 145-14-00190, CP62N-HWD, 114-6285 and 3-66059. Intended for dimension- and reference-matched construction machinery driveshaft service.
GU-3500 universal joint in the catalog size 39.69x115.95 mm for selected European vehicle and truck propeller shafts. This greaseable external-circlip kit includes the cross assembly, four installed bearing cups, four snap rings and an angled grease fitting. Important search references include GU3500, HS176, 5-15X, Precision/Moog 370 and SKF UJ370.
GU-3810 heavy-duty universal joint kit with 50 mm bearing diameter and 152.6 mm overall span. Supplied with triangular retaining plates, locking tabs, mounting bolts and grease fitting. Interchangeable with Volvo 1651032, 231519 and 232459.
GU4470 universal joint in the precise catalog size 42.12x104.5 mm, also searched as U447 and Precision 5871.5. The photographed greaseable kit includes one forged cross with four installed bearing cups and white seals, four external snap rings with eyelet holes and one separate 90-degree grease fitting. Important: U447 is reused by other catalog systems for different dimensions, so verify GU4470, cup diameter and overall span together.
GUIS-52 universal joint for ISUZU driveline service, with 29 mm bearing cups, 50 mm inside-circlip lock-up and approximately 76–77 mm overall span. Confirmed catalog references include 9-37300-065, 2-0383, 12976 and UJ314/UJ324. The photographed greaseable kit includes four special internal retaining rings.
