72176 universal joint in 72×176 mm size for selected FAW heavy-truck driveline service. This greaseable external-circlip kit includes one cross assembly, four installed bearing cups, four loose snap rings and one separate grease fitting. Confirm both dimensions and the original application before ordering because no verified OE interchange number is assigned to this listing.
72176 Universal Joint 72×176 mm | FAW Heavy Truck
Description
72176 Universal Joint 72×176 mm
The 72176 universal joint is a large heavy-duty cross-bearing kit for commercial-vehicle propeller-shaft and driveshaft service. Its primary dimensions are a 72 mm bearing cup diameter and a 176 mm overall span. The photographed set contains one cross assembly with four installed bearing cups, four separate external snap rings and one grease fitting.
This page uses 72×176 mm as the visible product size. The image filename and URL use 72×176 because web addresses do not use the multiplication sign. Before ordering, measure the removed joint with a caliper and compare the bearing cup diameter, total span, snap-ring arrangement and grease-fitting position.
Product Features
- 72 mm bearing cup diameter and 176 mm overall span.
- Heavy-duty forged cross body for commercial-vehicle driveline service.
- Four polished bearing cups with protective black and gold-colored seal rings.
- External retention design with four loose snap rings included.
- Greaseable construction with one separate grease fitting.
- Dimension-first identification for rare and low-competition replacement searches.
Because 72×176 mm is a less common large-size family, it should not be selected from the model number alone. Confirm the physical sample or technical drawing before treating any similar-looking cross bearing as interchangeable.
Technical Specifications
| Product type | Heavy-duty universal joint / propeller shaft cross kit |
|---|---|
| Primary model | 72176 |
| Bearing cup diameter | 72 mm |
| Overall span | 176 mm |
| Product size | 72×176 mm |
| Retention | Four external snap rings |
| Lubrication | Greaseable; fitting supplied separately |
| Kit contents | One cross assembly, four bearing cups, four snap rings and one grease fitting |
| Brand | MR Driveline |
Product Identification and Search Terms
Use 72176 universal joint, 72×176 universal joint, 72×176 cross bearing, 72×176 cardan shaft cross and FAW heavy truck universal joint when requesting this dimensional family. These are product-identification and buyer-search terms rather than verified OE interchange numbers.
No independent OE cross-reference number has been assigned to this page. This avoids false interchange claims and helps prevent a buyer from ordering a visually similar joint with a different cup diameter, overall span or retention structure.
Typical Applications
The original sample was marked as a supporting part for FAW equipment, so this listing is positioned for selected FAW heavy-truck driveline applications. The exact truck model, axle and propeller-shaft position have not been independently verified. Vehicle model alone must therefore not be used as the final compatibility check.
For an application review, send MR Driveline the complete original part number, vehicle model, axle or driveshaft position, bearing cup diameter, overall span and clear photographs of the removed universal joint. A physical sample or dimensional drawing is preferable for this uncommon size.
Installation Notes
Clean and inspect the yoke bores before assembly. Press every bearing cup squarely, protect the needle rollers from displacement and make sure all four snap rings seat fully in their grooves. Install the grease fitting in the specified port, lubricate the joint with the approved grease and verify smooth articulation without binding.
After assembly, check propeller-shaft phasing, fastener torque, free movement and shaft balance before returning the vehicle to service. Incorrect cup seating or incomplete snap-ring engagement can shorten bearing life and create driveline vibration.
Why Choose MR Driveline
MR Driveline organizes uncommon universal joints around measurable dimensions, retention design and verified kit contents. For a 72176 universal joint enquiry, our team can compare the 72×176 mm specification with the buyer’s sample, drawing and vehicle information before order confirmation.
We support truck-parts distributors, driveline workshops and fleet maintenance buyers with dimensional verification, quotations, customized packaging and repeat supply. Send the required quantity and compatibility information for a commercial offer.
FAQ
What are the dimensions of the 72176 universal joint?
The bearing cup diameter is 72 mm and the overall span is 176 mm. The visible size is written as 72×176 mm.
Does the kit include retaining rings?
Yes. The photographed set includes four loose external snap rings, one for each bearing cup.
Is the 72176 universal joint greaseable?
Yes. One separate grease fitting is included in the photographed set and must be installed in the designated lubrication port.
Which FAW truck uses this joint?
The original sample indicates a FAW supporting application, but the exact vehicle, axle and driveshaft position are not independently verified. Confirm the removed joint dimensions and original part information before ordering.
What information should I send for compatibility checking?
Send the original part number, vehicle model, axle or driveshaft position, 72 mm cup measurement, 176 mm overall span and clear photographs or a technical drawing.
Additional information
| Brand | MR Driveline |
|---|---|
| Bearing Cup Diameter | 72 mm |
| Overall Span | 176 mm |
| Retention Type | Four external snap rings |
| Lubrication | Greaseable; fitting supplied separately |
