3088 universal joint with 30 mm bearing cups, 55 mm inside-circlip lock-up and 88 mm overall span. The BJ212 drawing specifies four 33x1.5 mm internal retaining rings, a greaseable cross and XHP322 axle grease. This is an inside-circlip design: verify the cup diameter, distance between the inner retaining faces and full cup-to-cup span before ordering.
Dana Spicer 5-263X is a 1480 Series greaseable heavy-duty universal joint with a bearing cap diameter of 1.375" (34.9mm) and an overall width of 4.188" (106.4mm). Fits a wide range of heavy trucks and commercial vehicles. Direct replacement for 5-188X, 15-188X, and numerous OEM cross references including Volvo, Navistar, Komatsu, and International Harvester applications.
3598 universal joint in 35×98 mm size for driveshaft, propshaft and selected agricultural driveline service. This greaseable external-circlip kit includes one cross assembly, four installed bearing cups, four snap rings and an angled grease fitting. Important search references include UJ3598, UJ3598Q, UJ3598INA, NJ131, GU1000 and GUM71.
High-torque 95x160mm GWB 392.60 / SWP285 inside circlip universal joint for industrial driveshafts. Exact OEM replacement with cap & bolt design. Wholesale available.
39x116 universal joint marked 3916 for greaseable propeller-shaft service. Catalog references for the same dimensional family include GU3500, Spicer 5-15X and 5-115X, Precision 370 and GKN HS176. The photographed kit includes one assembled cross, four bearing cups, four external circlips and cup-end grease fittings. Confirm the measured cup diameter, overall span and circlip arrangement before ordering.
5-124X universal joint for 1800 Series driveline service, with approximately 58.9 mm bearing cups and 167.5 mm overall span (market size 59×168 mm). Cross references include G5-124X, UJ335, 335, HS324, 1804, U-107, CP124XE, 6-0124 and 230-0124. Greaseable kit with four bearing cups, four retaining rings and a grease fitting; verify dimensions and yoke retention before ordering.
5-153X universal joint for 1310 series driveshaft applications. Greaseable design with outside snap ring, 1.062" bearing cap diameter and 3.219" overall width (26.975 x 81.8 mm). Cross reference: Spicer 5-153X, Neapco 1-0153, SKF UJ369.
Part Number: 5-160X
Product Type: Universal Joint / U-Joint / Cross Kit
Series: Dana Spicer 1410 Series
Design: Outside Snap Ring (OSR)
Lubrication: Greaseable
Bearing Cap Diameter: 1.188 in / 30.175–30.188 mm
Overall Width / Lock-Up: 4.188 in / 106.35–106.4 mm
Snap Ring Type: External
Application: Driveshaft / Prop Shaft / Cardan Shaft
5-280X universal joint for Spicer 1710 Series full bearing-plate driveline applications. Official dimensions are 49.225 mm bearing cup diameter and 154.788 mm overall span. This greaseable BP-style kit uses bearing plates on all four cups and includes the mounting hardware shown. Search references include M280X, CP280X, US280X, Neapco 5-0280, 5-0280GXL, 5-0280Q, Precision 334, GMB G5280X and GU5000. Confirm plate-hole spacing, yoke style and dimensions before ordering.
5-281X universal joint for 1810 Series full-round bearing-plate drivelines. The greasable joint measures 49.225 mm (1.938 in) at the bearing caps and 191.694 mm (7.547 in) across the bearing-plate dimension. Verified comparison references include Neapco 6-0281, Meritor CP18N and Rockwell/Meritor R-281X. Confirm the dimensions and bearing-plate retention style before ordering.
5-675X universal joint for Spicer 1710 Series half-round driveline applications. Dana specifies 49.225 mm bearing cups, 154.788 mm length, bearing-plate x round cap construction and side-of-cross lubrication. The photographed greaseable kit includes the cross, four bearing cups, retaining straps or plates and mounting bolts. Search references include M675X, 6-0675, 6-0675GXL, 25-675X, 7525675X and CP675X. Confirm yoke style, span and bolt-hole spacing before ordering.
5-7126 universal joint for Mechanics 7C heavy-duty drivelines. Nominal identification dimensions are 49.2 mm wing bolt-hole centre distance and 148.4 mm lock-up span. Four HWD wing bearings, greaseable cross, mounting bolts and split lock washers are shown. Cross references include G5-7126X, 5-7105X, Precision 927, CP72N-31, HS575, U7105 and Caterpillar 6H2577.
50135 universal joint in the nominal 50x135 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. Search references include 5320-2205025, 5320-2205025-01, 131-2205025, 53205-2201025 and 6520-2201025. The photographed greaseable kit contains one cross with four installed bearing cups, four external circlips, one angled grease fitting and the shown protective accessory. Confirm all dimensions and retention details before ordering.
50155 universal joint in the 50x155 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. The photographed greaseable kit includes one cross with four installed bearing cups, four external circlips, one angled grease fitting and the supplied protective accessory. Search references include 4310-2205025, 255B-2201025, UJ255B, 804707A1C10 and 804707K8C10; confirm the retention style and yoke measurements before ordering.
53×135 mm serviceable universal joint for selected Mercedes-Benz truck and bus propeller shafts. Features a central grease fitting and external circlip retention. Cross references include U993, GU7610, CEI 133.090, 286.37 and Mercedes-Benz OE 6204100131.
- Dimensions: Bearing cap Ø 52 mm × Span 133 mm
- Fixing type: External circlips (OSR, circlips usually included in kits)
- Lubrication options: Greaseable (central greaser / grease nipple) or service-free / maintenance-free (lube-for-life, no grease fitting)
- Applications: Heavy-duty truck drivelines, propeller shafts in medium to heavy commercial vehicles
- Material: High-strength forged alloy steel (often 20Cr or 20CrMnTi) with precision-ground needle bearings for high torque, vibration resistance, and longevity
- Common series reference: 587.30 / 58730 (GWB / Dana style), or equivalent European heavy-duty metric series, GU7560 HS282
587.50 universal joint72x185mm universal joint manufactured by our factory, designed as a 587.50 type replacement for industrial cardan shaft and drive shaft applications. With stable dimensions and reliable fitment, it is suitable for aftermarket replacement, repair, and OEM supply.
59x167.7 universal joint for European heavy-truck propeller shafts, cross-referenced with CEI 133.144, Volvo 1651237 and 1068253, MAN 81391266039 and Renault 7401068253. The photographed MR Driveline version has four assembled bearing cups, four yellow-green seals and two body-mounted grease fittings. Catalogs may state 59x167.6 mm or 59x167.8 mm, so confirm cup diameter, overall span and retention details before ordering.
The 65×172 Universal Joint (587.48 Series / SWB65172) is designed for heavy-duty industrial driveshaft applications requiring reliable torque transmission and long service life. Manufactured from premium alloy steel with precision machining, heat treatment and high-quality needle bearings, this universal joint offers excellent wear resistance, smooth operation and outstanding durability. OEM manufacturing and customized packaging are available.
The 687.35 flange yoke is a Ø150 mm end-face serrated driveshaft flange yoke for a 42x119.4 mm universal joint. It features a Ø130 mm pitch circle and 8xØ12 mm mounting holes for drawing-matched production.
- Bearing Cap Diameter (C): 52.00 mm (2.047")
- Lock-up / Span (B1): 147.2 mm (5.795")
- Design: Outside Snap Ring (OSR / External Circlip) – circlips included
- Material: High-grade alloy steel cross with heat-treated needle bearings
- Max Operating Angle: 25°
- Functional Limit Torque: 17,000 Nm
- Fatigue Torque: 5,100 Nm
- Weight: Approx. 3.42 kg
- Options: Greaseable (central lube nipple) or Maintenance-Free (sealed, no grease fitting)
687.55 flange yoke with a 180 mm cross-serrated face for 2055-series 57x152 mm universal joints. Four-bolt arrangement, 150 mm PCD and 100 mm nominal flange-face-to-bearing-centreline dimension.
687.55 slip assembly for 2055-series heavy-duty propeller shafts using a nominal 57x152 mm universal joint and 120 mm sleeve section. Greaseable protected-spline construction; confirm spline geometry, working length and slip travel before ordering.
687.55 weld yoke for 2055-series 57x152 mm universal joints and 120x6 mm driveshaft tube. Forged steel construction with machined bearing bores and nominal 108 mm weld-fit bore.
70166 universal joint in 70×166 mm size for FAW J5/J6 heavy-truck driveline service. Important search references include 2205030B761, 2205030B761/B, UW70166. The photographed set includes one cross assembly with four installed bearing cups and one separate grease fitting; no loose retaining rings are shown.
72176 universal joint in 72×176 mm size for selected FAW heavy-truck driveline service. This greaseable external-circlip kit includes one cross assembly, four installed bearing cups, four loose snap rings and one separate grease fitting. Confirm both dimensions and the original application before ordering because no verified OE interchange number is assigned to this listing.
CA-141 universal joint in the customer-specified 39x118 mm size for selected truck and propeller-shaft applications. The greaseable kit shown includes one cross with four installed bearing cups, four external snap rings and one side grease fitting. EQ140 is included as a useful cross-search term, but cup diameter and overall span must be measured before interchange is confirmed.
Can be made as forging or castingMake dynamic balance
G5-6128X universal joint with a 42.8 mm bearing-cap diameter and 140.4 mm overall span. Four-wing heavy-duty 4HWD construction with greaseable cross, mounting bolts and spring washers. Cross references include 5-6128X, 1S9670, 145-14-00190, CP62N-HWD, 114-6285 and 3-66059. Intended for dimension- and reference-matched construction machinery driveshaft service.
GU-3500 universal joint in the catalog size 39.69x115.95 mm for selected European vehicle and truck propeller shafts. This greaseable external-circlip kit includes the cross assembly, four installed bearing cups, four snap rings and an angled grease fitting. Important search references include GU3500, HS176, 5-15X, Precision/Moog 370 and SKF UJ370.
GU-3810 heavy-duty universal joint kit with 50 mm bearing diameter and 152.6 mm overall span. Supplied with triangular retaining plates, locking tabs, mounting bolts and grease fitting. Interchangeable with Volvo 1651032, 231519 and 232459.
