3102-2201025 universal joint with 30 mm bearing cups, 55 mm inside-circlip lock-up and 88 mm overall span. Cross references include UJ3110, 3088, 31029-2201026, 69-2201025, 469-2201025 and BJ212. Suitable for dimension-matched GAZ, UAZ, Volga and Gazelle propeller-shaft service; verify all three measurements and the internal retaining-ring style before ordering.
Dana Spicer 5-263X is a 1480 Series greaseable heavy-duty universal joint with a bearing cap diameter of 1.375" (34.9mm) and an overall width of 4.188" (106.4mm). Fits a wide range of heavy trucks and commercial vehicles. Direct replacement for 5-188X, 15-188X, and numerous OEM cross references including Volvo, Navistar, Komatsu, and International Harvester applications.
3598 universal joint in 35×98 mm size for driveshaft, propshaft and selected agricultural driveline service. This greaseable external-circlip kit includes one cross assembly, four installed bearing cups, four snap rings and an angled grease fitting. Important search references include UJ3598, UJ3598Q, UJ3598INA, NJ131, GU1000 and GUM71.
High-torque 95x160mm GWB 392.60 / SWP285 inside circlip universal joint for industrial driveshafts. Exact OEM replacement with cap & bolt design. Wholesale available.
39x116 universal joint marked 3916 for greaseable propeller-shaft service. Catalog references for the same dimensional family include GU3500, Spicer 5-15X and 5-115X, Precision 370 and GKN HS176. The photographed kit includes one assembled cross, four bearing cups, four external circlips and cup-end grease fittings. Confirm the measured cup diameter, overall span and circlip arrangement before ordering.
5-124X universal joint for 1800 Series driveline service, with approximately 58.9 mm bearing cups and 167.5 mm overall span (market size 59×168 mm). Cross references include G5-124X, UJ335, 335, HS324, 1804, U-107, CP124XE, 6-0124 and 230-0124. Greaseable kit with four bearing cups, four retaining rings and a grease fitting; verify dimensions and yoke retention before ordering.
5-153X universal joint for 1310 series driveshaft applications. Greaseable design with outside snap ring, 1.062" bearing cap diameter and 3.219" overall width (26.975 x 81.8 mm). Cross reference: Spicer 5-153X, Neapco 1-0153, SKF UJ369.
Part Number: 5-160X
Product Type: Universal Joint / U-Joint / Cross Kit
Series: Dana Spicer 1410 Series
Design: Outside Snap Ring (OSR)
Lubrication: Greaseable
Bearing Cap Diameter: 1.188 in / 30.175–30.188 mm
Overall Width / Lock-Up: 4.188 in / 106.35–106.4 mm
Snap Ring Type: External
Application: Driveshaft / Prop Shaft / Cardan Shaft
5-280X universal joint for Spicer 1710 Series full bearing-plate driveline applications. Official dimensions are 49.225 mm bearing cup diameter and 154.788 mm overall span. This greaseable BP-style kit uses bearing plates on all four cups and includes the mounting hardware shown. Search references include M280X, CP280X, US280X, Neapco 5-0280, 5-0280GXL, 5-0280Q, Precision 334, GMB G5280X and GU5000. Confirm plate-hole spacing, yoke style and dimensions before ordering.
5-281X universal joint for 1810 Series full-round bearing-plate drivelines. The greasable joint measures 49.225 mm (1.938 in) at the bearing caps and 191.694 mm (7.547 in) across the bearing-plate dimension. Verified comparison references include Neapco 6-0281, Meritor CP18N and Rockwell/Meritor R-281X. Confirm the dimensions and bearing-plate retention style before ordering.
5-675X universal joint for Spicer 1710 Series half-round driveline applications. Dana specifies 49.225 mm bearing cups, 154.788 mm length, bearing-plate x round cap construction and side-of-cross lubrication. The photographed greaseable kit includes the cross, four bearing cups, retaining straps or plates and mounting bolts. Search references include M675X, 6-0675, 6-0675GXL, 25-675X, 7525675X and CP675X. Confirm yoke style, span and bolt-hole spacing before ordering.
5-7126 universal joint for Mechanics 7C heavy-duty drivelines. Nominal identification dimensions are 49.2 mm wing bolt-hole centre distance and 148.4 mm lock-up span. Four HWD wing bearings, greaseable cross, mounting bolts and split lock washers are shown. Cross references include G5-7126X, 5-7105X, Precision 927, CP72N-31, HS575, U7105 and Caterpillar 6H2577.
50135 universal joint in the nominal 50x135 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. Search references include 5320-2205025, 5320-2205025-01, 131-2205025, 53205-2201025 and 6520-2201025. The photographed greaseable kit contains one cross with four installed bearing cups, four external circlips, one angled grease fitting and the shown protective accessory. Confirm all dimensions and retention details before ordering.
50155 universal joint in the 50x155 mm heavy-duty cross-bearing family for KAMAZ and related Russian commercial-vehicle drivelines. The photographed greaseable kit includes one cross with four installed bearing cups, four external circlips, one angled grease fitting and the supplied protective accessory. Search references include 4310-2205025, 255B-2201025, UJ255B, 804707A1C10 and 804707K8C10; confirm the retention style and yoke measurements before ordering.
53×135 mm serviceable universal joint for selected Mercedes-Benz truck and bus propeller shafts. Features a central grease fitting and external circlip retention. Cross references include U993, GU7610, CEI 133.090, 286.37 and Mercedes-Benz OE 6204100131.
- Dimensions: Bearing cap Ø 52 mm × Span 133 mm
- Fixing type: External circlips (OSR, circlips usually included in kits)
- Lubrication options: Greaseable (central greaser / grease nipple) or service-free / maintenance-free (lube-for-life, no grease fitting)
- Applications: Heavy-duty truck drivelines, propeller shafts in medium to heavy commercial vehicles
- Material: High-strength forged alloy steel (often 20Cr or 20CrMnTi) with precision-ground needle bearings for high torque, vibration resistance, and longevity
- Common series reference: 587.30 / 58730 (GWB / Dana style), or equivalent European heavy-duty metric series, GU7560 HS282
587.50 universal joint72x185mm universal joint manufactured by our factory, designed as a 587.50 type replacement for industrial cardan shaft and drive shaft applications. With stable dimensions and reliable fitment, it is suitable for aftermarket replacement, repair, and OEM supply.
59x167.7 universal joint for European heavy-truck propeller shafts, cross-referenced with CEI 133.144, Volvo 1651237 and 1068253, MAN 81391266039 and Renault 7401068253. The photographed MR Driveline version has four assembled bearing cups, four yellow-green seals and two body-mounted grease fittings. Catalogs may state 59x167.6 mm or 59x167.8 mm, so confirm cup diameter, overall span and retention details before ordering.
The 65×172 Universal Joint (587.48 Series / SWB65172) is designed for heavy-duty industrial driveshaft applications requiring reliable torque transmission and long service life. Manufactured from premium alloy steel with precision machining, heat treatment and high-quality needle bearings, this universal joint offers excellent wear resistance, smooth operation and outstanding durability. OEM manufacturing and customized packaging are available.
- Bearing Cap Diameter (C): 52.00 mm (2.047")
- Lock-up / Span (B1): 147.2 mm (5.795")
- Design: Outside Snap Ring (OSR / External Circlip) – circlips included
- Material: High-grade alloy steel cross with heat-treated needle bearings
- Max Operating Angle: 25°
- Functional Limit Torque: 17,000 Nm
- Fatigue Torque: 5,100 Nm
- Weight: Approx. 3.42 kg
- Options: Greaseable (central lube nipple) or Maintenance-Free (sealed, no grease fitting)
70166 universal joint in 70×166 mm size for FAW J5/J6 heavy-truck driveline service. Important search references include 2205030B761, 2205030B761/B, UW70166. The photographed set includes one cross assembly with four installed bearing cups and one separate grease fitting; no loose retaining rings are shown.
CA-141 universal joint in the customer-specified 39x118 mm size for selected truck and propeller-shaft applications. The greaseable kit shown includes one cross with four installed bearing cups, four external snap rings and one side grease fitting. EQ140 is included as a useful cross-search term, but cup diameter and overall span must be measured before interchange is confirmed.
Can be made as forging or castingMake dynamic balance
G5-6128X universal joint with a 42.8 mm bearing-cap diameter and 140.4 mm overall span. Four-wing heavy-duty 4HWD construction with greaseable cross, mounting bolts and spring washers. Cross references include 5-6128X, 1S9670, 145-14-00190, CP62N-HWD, 114-6285 and 3-66059. Intended for dimension- and reference-matched construction machinery driveshaft service.
GU-3500 universal joint in the catalog size 39.69x115.95 mm for selected European vehicle and truck propeller shafts. This greaseable external-circlip kit includes the cross assembly, four installed bearing cups, four snap rings and an angled grease fitting. Important search references include GU3500, HS176, 5-15X, Precision/Moog 370 and SKF UJ370.
GU-3810 heavy-duty universal joint kit with 50 mm bearing diameter and 152.6 mm overall span. Supplied with triangular retaining plates, locking tabs, mounting bolts and grease fitting. Interchangeable with Volvo 1651032, 231519 and 232459.
GU-4000 universal joint in 47.62x134.9 mm size for selected European truck propeller shafts. This greaseable loose-plate kit includes the cross assembly, four retaining covers, two locking plates, eight bolts and a side grease fitting. Common catalog references include GU4000, HS316, SKF UJ333, Meritor R279X and Moog 333.
GU-5000 universal joint in the catalog size 49.2x154.8 mm for heavy-duty propeller-shaft and cardan-shaft repair. The photographed greaseable kit includes one cross with four installed bearing cups, four round two-hole retaining plates, eight bolts and one angled grease fitting. Major search references include GU5000, HS337 and the closely matched 5-280X family; verify plate hole spacing and cup geometry before ordering.
GU4470 universal joint in the precise catalog size 42.12x104.5 mm, also searched as U447 and Precision 5871.5. The photographed greaseable kit includes one forged cross with four installed bearing cups and white seals, four external snap rings with eyelet holes and one separate 90-degree grease fitting. Important: U447 is reused by other catalog systems for different dimensions, so verify GU4470, cup diameter and overall span together.
- Dimensions: Bearing cap Ø 57 mm × Overall length 152 mm
- Fixing type: External circlips (included in most kits)
- Lubrication options: Greaseable (central greaser) or service-free/lube-for-life (maintenance-free)
- Applications: Heavy-duty truck drivelines, propeller shafts (cardan shafts)
- Material: High-strength alloy steel with precision-ground bearing surfaces for durability under high torque and load
GUH-77 universal joint in the catalog size 44x125.5 mm for selected Hino 500, Hino Ranger and related propeller-shaft searches. This greaseable kit includes one cross with four installed bearing cups, four open external C-type snap rings and one separate 90-degree grease fitting. Major identification references include GUH77, TH-177, 37410-1220 and 37401-1350.
GUIS-52 universal joint for ISUZU driveline service, with 29 mm bearing cups, 50 mm inside-circlip lock-up and approximately 76–77 mm overall span. Confirmed catalog references include 9-37300-065, 2-0383, 12976 and UJ314/UJ324. The photographed greaseable kit includes four special internal retaining rings.
HCZ110 universal joint for 4C Series wing-bearing driveshaft applications. Cross references include 5-4143X, UJ969, Precision 969, Neapco 3-4143, ZM 35.005.01 and 801003. Greaseable Type 5 design with C 36.5 mm, D 107.9 mm, E 86.9 mm and F 9 mm.
GWB 392.55 or 292.55 u-jointalso it is our SWP250 universal jointWe can make it both 83*139 and 83*140We can make as material 20CrMnTi or 20Cr2Ni4a
Item NO. 4-28-307 weld yoke, tube yoke made by forgingTransport Package:Export PackingOrigin:ChinaHS Code：8483900090
Hardness:58 - 64 HRCMaterial:20Cr or 20CrMnTiType: Wing Style / Wing BearingOperating Angle: 25-30 degreeApplication: Manufacturing Plant, Machinery Repair ShopsWarranty:one year
Dimensions:61.8 x 154.85;49.2x157mmHardness:58-64 HRCWorking Angle: 5 degreeMaterial:20Cr or 20CrMnTiApplication:Manufacturing Plant, Machinery Repair Shops
Material:20CrMnTiHigh QualitySame size to GU7630 HS289 5-12932X 5-12932XType Part No. D (mm) L (mm) Spicer Precision GMB GKN Alloy Other A ST-6X18 6 18 A ST-9X22 9 22 A ST-9X28 9 28 A ST-13X39 13 39 A ST-15X39 15 39 A ST-15X40 15 40 A ST-16X39 16 39 A ST-16X40 16 40 A GU-1744 17 44 A ST-18X47 18 47 C01 U130 18059 A GU1944 18 44 U006 11718 A GU1948 19 48 U132 13777 A ST-19X52 19 52 A GUD81 20 55 4141-4120 UJ218 A GUD86 20 55.1 04371-87501 A GUT-11 20 57 04371-10011 T2057 UJ212 U180 GU1800 A GUDUMP1 20 57.5 HM2058 UJ912 A GUH69 20 58 45220-1060 A GUMZ-2 20.02 55 0180-25-060 TM2055 UJ412 GUM92 A GUN45 20.07 52.4 37125-H8500 A GUS6 20.1 59.8 27200-60511 A GUIS59 20.5 56.6 44135-060 GUN44 A GUA-3 22 54 K5-A588 811 EG10 U138 18052 A GUA-4 22 54 812 GUA-4 HS132 A 5-31000X 22 55 5-31000X W2100 A GU1700 22 55.6 A GU7800 22 59 A GUDUMP3 22 62 UJ910 A GU295 22 64 A GUH03 22 65 44330-538-004 HD2265C UJ810 A GU296 22 67 A GU1760 22 67.5 A GUT-24 22.06 57.5 U024 11741 A GUMZ-11 22.06 59.6 A GUIS63 22.06 62.5 94207232-1 GUM85 A GU2100 22.21 62.1 A 5-111X 23.8 61.3 5-111X 341 GU500 HS194 1027 U-115 A GU-515 23.8 65.9 A 5-32000X 23.82 61.2 5-32000X GUIS56 9-37300-609 CZ122 A GUH66 23.82 65.96 6042-8409-00 H2466 UJ516 A GU410 24 61.3 A GU298 24 62.5 A GU1670 24 63 A GU200 24 63.31 A GU299 24 74.5 A GU297 24 78 A GUMZ-12 24.06 71.6 A GU7280/4 24.09 74.55 U728/4 A GUA-6 24.9 72.1 A GU720/730 25 56.9 A GUD83 25 63.8 4123-4120 UJ219 A GUM78 25 63.8 ST-0003 UJ619 A GUM79 25 63.8 ST-0024 M2504 UJ616 A GUM81 25 63.8 MB-00345 S2765 UJ625 A GUMZ-1/5 25 63.8 0136-25-060 TM2564A UJ410 A GUS7 25 63.8 27200-83010 A 5-1516X 25 76.5 5-1516X 399 GUM88 HS153 1016 MB000776 A GUM91 25 76.7 MB000948 M2576 A GUDUMP2 25 77 KAWANISHI(L) HM2577 UJ911 A GUN36 25 77.6 37125-4101 NP2578 UJ120 A GUM76 25 77.8 13018-21200 M2578A UJ614 A GU750 25.03 60 A GUM84 26 68 18433-51700 UJ623 A GU7410 26 69.8 HS159 A U080 26.94 61.85 5-310X 437G UJ080 A GU700 26.99 61.86 5-315X 373 1007 A 5-443X 27 61.9 5-443X 437G G5-443X HS197 5-310X GU800 A GU1210 27 62 A GUM77 27 65.3 ST-0008 S2765 UJ617 A GU1100 27 74.6 5-4X 344 5-33000X HS195 K5L4R A GU1780 27 80 GUK12 A 5-153X 27 81.7 5-153X 369 GU1000 HS166 1032 U-101HD A 5-134X 27 92 5-213X 353 G5-134X 1034/41034 U-131 A U227 27 92 5-130X/5-213X 354 UJ227 A 5-4X 27.01 74.6 5-4X 344 GU1100 HS195 1021 U100 A GUA-7 27.02 70.15 K5-A590 813 EG30 HS168 A GUA-8 27.02 74.8 K5-LGB36R 344AG EG40 HS186 A GUSR-3 28 52.6 6232-4300 A GUD82 28 80 04371-87303 D2880 UJ220(225) GUD87 A 5-1509X 28.5 77.7 5-1509X 396 GUT14 HS172 A GUT-14 28.5 77.9 04371-60010 T2978 UJ214 A 5-129X 28.6 66.5 5-129X 880 GGPL-14R AM-14R A GU290 28.6 75 A GUA-9 29 80 A GUM87 30 78.2 MB000119 UJ627 A GUA-10 30 81.7 A GU3082 30 82 A GU30826 30 82.6 A GU3083 30 83 A GUN30 30.17 90.1 37125-85461 N3092 UJ115 A 5-1205X 30.17 92.1 5-1205X A 5-10X 30.18 106.3 5-160X 330 GU2050 HS179 1807 A GU2200 30.188 92.075 5-178X 331 HS182 A 5-160X 30.188 106.35 5-160X 330 GU2000 HS179 1750 A GUA-11 30.22 80.15 K5-A590 815 EG50 HS198 A GUA-12 30.22 92.2 K5-LGB182 331AG EG60 HS182 A GUA-13 30.22 106.7 K5-A536 330 EG70 HS179 A GU-7431 31 88 A GU2600 31.25 71.4 A 5-243X 31.7 81.4 5-243X 964 GGPL-35R HS202 1781 UJ979 A GUM75 31.8 102 A GUA-14 32 75.9 814 HS204 A 5-3400X 32 76 5-3400X CZ140 A GU2010 32 106.32 A GUIS66 33 93 5-37300-032-0 A GU-3303 33 103 8980336051 8973227490 A 5-431X 33.3 67.4 5-431X 888 GGP-44R A GUA-15 34 90 816 A GU-3350 34 97 1648560 U336 U337 U681 A GUT-15 34 107 04371-55011 T34107 UJ216 A 5-188X 34.9 106.3 5-188X 351 GU2300 HS263 1756 U120 A 5-155X 34.9 126.2 5-155X 358 G5-155X HS275 1805 U-132 A GU-3593 35.04 93 91423201 91460215 A GU7430 35 96.8 U743 HS222 A GUIS62 35 103.92 1373000130 1351041 A GUA-17 35 106.5 K5-A538 351AG EG80 HS183 A GUH63 35.01 99 3-331-3403-01 H3599 UJ514 A GUN32 35.5 119.2 37125-58026 N36119 UJ117 A GUA-20 36 89 817 HS230 A GUM72 36 104 13518-22000 M36104 UJ613 A GUH65 36 110.3 3-445-3034-04 H36110 UJ515 A GUH74 36 115.6 37401-1100 A GUM82 38 104 13501-11010 M38104 UJ624 A GU7440 38 105.6 U744 HS236 A GU3650 38 110 93192007 81391086052 A GUKO-16 38.91 109.4 380-154073-1 UJK35106 A GU3850 39 127 A GU3500 39.67 115.4 5-15X 370 HS176 A GUIA-18 39.7 115.8 A GUIS64 40 115 1-37300-047-0 A KC2832ADW 40 115.6 A GUT-16 40 118 04371-55020 T40119 UJ215 GUT-22 A GUH60 40.2 115 37401-1172 A GUA-21 41 118 A 5-165X 41.2 142 5-165X 359 G5-165X HS252 1801 U-133 A SPL90-1X 41.28 126 CZ271 A GU4470 42.12 104.5 U447 A GUN33 43 128 37125-99901 ND43128 UJ119 A GU3800 44 126 22860300/232458 UJ380 HS255 A U384 44 149 5-12276X/264043 UJ384 A U753 45 120.4 5-1210X GU7530 UJ753 HS260 U932 A 5-12100X 45 130 5-12100X A GU7490 45.04 118.1 A GU7540 45.04 121.6 A GUIS65 45.98 136 1-37300-004-0 A GU8100 47 131.1 106829-586969 U810 A GU9730 48 116.4 HS271 A GU7650 48 126 5-12219X U765 3814100231 UJ765 A GU4835 48 135 93192015 1451320 U887 A GU9480 48 161 5-12062X/337059 81391266033 UJ948 A GU7670 48 116.5 U767 A 5-12219X 48.05 125.8 5-12219X GU7620 HS272 A 5-12062X 48.05 160.9 5-12062X HS268 A SPL140-1X 49.22 139 A GU8110 50 131 HS278 A U381 50 152.6 1651032 GU3810 UJ381 A GU7390 50 153.8 A GUH64 50 159 3-302-3403-06 H50159 UJ513 A GU-3880 50 164 5-12278X U388 A 5-12924X 52 133 5-12924X GU7560 HS282 A GU7600 52 147.2 1068247 A WLD-52 52 148 A GU-7610 53 135 4100231 U761 HS284 9424100131 6204100131 A SPL170-1X 55 165 A GU-8120 55 164 S-E358 A 5-185X 55.6 205.6 A 5-12072X 57 162.9 5-12072X A GU8130 57 144 232540 U813 HS288 A 5-12932X 57 152 5-12932X GU7630 HS289 6204100131 3874100031 A U990 57 152.6 1651229 1067293 A GU-9200 57 172 1288233 93157114 U936 A GU-2409 59 167.5 5-124X 1068253 U915 1651237 A SPL250X 60 163 4103431 8127182 A GU-9732 60 181 A GU-6272 62 172 A GU-6572 65 172 6454100131 UJ982 A GU-9240 65 190 386073 1422442 UJ924 A GU-7285 72 185 A GU-8339 83 139 A GU-8375 83 175 
U-joint diameter:83mm and length 220mm.We can make as material 20CrMnTi or 20Cr2Ni4aSWC,SWB,SWL type universal joint,outside circlip universal joint,outside snap ring u-joint,
*We can make it 90*191 mm or 90*192 mm,as your requirement.*The material can be 20CrMnTi or 20Cr2NI4A* High quality with reasonable price*We can make nearly all the dimensions for you
1.The cardan shaft can be made as forging or casting.2.Can make the dynamic balance and dynamic balance grade is G16.3. Coupling rotate flexible after assembly with Max angle 15 degree.
- High Quality
- Reasonable price
- Widely used in agricultural machinery,construction machinery
*We also make the dimension as 95*220mm for some clients*High Quality and reasonable prices*We have many in stock and delivery time is short
Matwerial:20CrMnTi or 20Cr2Ni4AMade by forgingHave a lot of in stock,delivery time can be very short
U992 universal joint in the heavy-duty 68x89x165.5 mm configuration, also searched as ZK6800 for SHACMAN F3000 propeller-shaft service. The photographed greaseable kit includes one forged cross with four installed bearing cups, four large slotted external retaining rings and one separate 90-degree elbow grease fitting. Confirm all three dimensions and the retaining-ring arrangement before ordering because rounded 68x166 listings may use different groove positions.
WG9725310020 universal joint in the 62×160 mm heavy-duty size for HOWO, FAW and SHACMAN driveline service. Confirmed search references include GU-62160, 2205030B377 and SH24-00606. The photographed greaseable kit shows one cross with four installed bearing cups, four retaining rings and one separate open cup displaying the needle rollers.
